|
Respiratory Products |
|
Distributors of Safety, Packaging and Washroom Products
|
|
P1 Dust/Mist Respirator Industrial Quality Disposable Respirator Lightweight disposable respirator Contour fit Easy breathing/speaking Clear vision Maintenance free Twin elastic headbands Adjustable nose bridge allows snug fit to a range of face shapes and sizes Comfortable foam nose seal |
|
P1 Dust/Mist Valved Respirator Industrial Quality Disposable Respirator Valve Lightweight disposable respirator Contour fit Easy breathing/speaking Clear vision Maintenance free Twin elastic headbands Adjustable nose bridge allows snug fit to a range of face shapes and sizes Comfortable foam nose seal |
|
P2 Dust/Mist Respirator Industrial Quality Disposable Respirator Lightweight disposable respirator Contour fit Easy breathing/speaking Clear vision Maintenance free Twin elastic headbands Adjustable nose bridge allows snug fit to a range of face shapes and sizes Comfortable foam nose seal |
|
P2 Dust/Mist Valved Respirator Industrial Quality Disposable Respirator Valve Lightweight disposable respirator Contour fit Easy breathing/speaking Clear vision Maintenance free Twin elastic headbands Adjustable nose bridge allows snug fit to a range of face shapes and sizes Comfortable foam nose seal |
|
3M Cupped Respirators This comfortable and reliable respiratory protection offers excellent fit over a wide range of face sizes thanks to its convex shape, nose clip and twin strap design. It also incorporates a durable collapse resistant inner shell |
|
R-3M8812 P1 Box 10 Respirators R-3M8710 P1 Box 20 Respirators R-3M8822 P2 Box 10 Respirators R-3M8210 P2 Box 20 Respirators |
|
P1 or P2?
P1 is the rating given to a respirator that meets Australian Standard AS/NZS1716 for filtering mechanically generated particles e.g. particles formed by crushing, grinding, drilling, sanding, cutting etc. P2 is the rating given to a respirator that meets Australian Standard AS/NZS1716 for filtering mechanically and thermally generated particles e.g. those generated from welding fume. These are also the recommended type for use against biological particles. |
|
When to replace your filters? Replace your filters regularly!
If you can detect by smell or taste the chemical coming through the filters on your respirator then it is time to change the filters. Both filters must be changed together.
Once it becomes difficult to breathe comfortably then its time to replace both filters. |
|
Sundstrφm SR100 Half Mask Made from silicon (comfortable & easy to clean) 2 exhalation valves to ensure low exhalation resistance Special valve covers with baffles to protect membrane against dust and paint mist R-SR307 compressed air attachment can be connected |
|
Sundstrφm SR200 Full Face Mask Excellent full face protection & breathing comfort 2 exhalation valves for minimum exhalation resistance Mask body is made from silicon for maximum comfort Inhaled air is guided past the inside of the visor to prevent misting Lightweight sturdy construction (approx. 450gm) |
|
Sundstrφm Filters (General) Filters can be combined to be used at same time by simply pressing them together. Note: Particle filters must always be fitted in front of gas filters for added protection. Part No. Product Description R-SR217 Brown labeled filter Solvent vapors (A) 5 per box R-SR218 Brown labeled filter Organic gases whose boiling point exceeds +65ΊC 4 per box R-SR510 White labeled filter Particulates (P3) 5 per box R-SR297 Brown, grey, yellow & green labeled filter Organic, inorganic acid gases and ammonia (ABEK1) 4 per box R-SR315 Brown, grey, yellow labeled filter Organic, inorganic acid gases (ABE1) 5 per box R-SR221 Pre filter designed to protect and extend the life of the R-SR510 particle filter 80 per box |
